JSELEC

Category: Uncategorized

  • Docker autostart container

    Docker autostart container

    Create service

    make file in /etc/systemd/system/

    cd /etc/systemd/system
nano /docker-[containername].service

    Insert following code:

    [Unit]
Description=Docker [containername] server
Requires=docker.service
After=docker.service
[Service]
Restart=always
ExecStart=/usr/bin/docker start -a [containername]
ExecStop=/usr/bin/docker stop -t 2 [containername]
[Install]
WantedBy=default.target

    Add service to systemd

    systemctl enable docker-[containername].service

    When system reboots, service will be started.

  • Linking Tytera DMR to APRS

    Linking Tytera DMR to APRS

    This is a walk-through to get APRS working on your Tytera radio. It is only possible to send APRS packets if you are directly connected to a ‘real’ DMR repeater. Connections like via DV4mini do not support the packets.

    Radio configuration MD-380/390 GPS

    The starting point is that you programmed the latest version code plug.

    Use the appropriate CPS program, for example, CPS MD390

    Load the configuration from the radio to your PC.

    Open window ‘General Setting’

    Fill in the ‘Radio Name’ field with your callsign.
    Fill in the ‘Radio ID’ field with your DMR ID.

    Open window ‘Menu Item’

    Check the GPS option. You can then later see what the status of your GPS reception is.

    Open window ‘Digital contacts’

    Add a new contact, call this GPS with call type ‘privat’ and ID 5057.

    Open window ‘GPS System’

    Use tab 1 and set the following:
    – GPS revert channel: Current CH
    – Default GPS Report Interval (s): 60 (if everything works, please increase interval to avoid inconvenience to other users)
    – Destination ID: GPS (is Digital Contact added in previous step)

    Open window ‘Channel Information’

    At GPS, select option ‘1’.

    Programming

    In the CPS program, everything is now set up. Download the data to the radio.

    Setup Brandmeister Self-care

    Log on to the Brandmeister website
    https://brandmeister.network/

    Enter the information as shown in the image below

    Chinese Radio
    60 sec
    APRS Callsign: your callsign supplemented by -7
    APRS Text: your callsign

    Save the modification

    Testing

    If everything is configured correctly, you can begin testing.
    Make sure you set a zone that contains the channel that was customized with option GPS = 1.
    If all goes well, you will now see a globe at the top of the screen. In the beginning there will be a red cross.
    When reception is good, the cross will disappear and your position will be transmitted every minute.

    It is also possible to activate GPS manually via the menu for each channel.
    Make sure you have selected GPS setting 1.

    Congratulations, you are now visible in the aprs network!